PRODUCTS - abter steel pipe manufacturer, natural gas casing and tubing,seamless steel pipe,OCTG,

February 10, 2018

Low-temperature seamless steel pipe standard

Standard: GB / T 18984-2003 Uses: Applicable -45 ~ -100 ℃ at low temperature pressure vessels and low temperature heat exchanger pipe. Main production steel grade: 09DG, 16MnDG Mechanical behavior: Grade Rm (MPa) ReL (MPa) A (%) Impact test T ( ° C ) Kv (J) 16MnDG 490 ~ 665 ≥ 315 ≥ 30 […]

February 4, 2018

How to cut 3PE anticorrosion steel pipe ?

In the installation of 3PE anti-corrosion steel pipe In the early stage does not have the length of the plan, such as 3pe anti-corrosion pipe routine is 12 meters. But sometimes in some parts of the project need is 3 meters, this time need to 3pe anti-corrosion steel pipe cutting. […]

January 30, 2018

Why use Epoxy Coating Pipe? The definition of anticorrosive steel pipe.

The aging of steel tubes has prompted the birth of anticorrosive steel pipes： As carbon steel pipes age, they become subject to wear and tear. They develop weak spots, which can result in small leaks throughout the system. They can also gradually become unsafe, and eventually a failure may occur, […]

January 26, 2018

ASTM A53 Black & Galvanized Pipe, 1/8″ – 26″

Product Name: ASTM Electrical Resistance Weld (ERW) Black and Hot-dip Galvanized Steel Pipe Standard: ASTM A53 Internatioanal Standard: ISO 9001 Size Range Seamless Pipe 1/8” ～24”, DN15～DN600 API Line pipe：1/8”-48” inch, DN6～DN1200 Welded pipe：1/2”-60“inch Wall Thickness ：sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140, sch160, xxs, Product […]

January 21, 2018

ERW ,Spiral weld Pipe Definition and Manufacturing Process

Spiral steel pipe& Welded Pipe Manufacturing Process Spiral steel pipe & Welded Pipe is the primary manufacturing process for steel thicknesses that exceed spiral mill capabilities (greater than 1”). Electric resistance weld (ERW) pipe Definition : is normally produced in sizes from 2-³∕₈” OD thru 24” OD.ERW is produced from […]

January 16, 2018

What is the difference between casing pipe and well screen pipe?

Casing pipe definition: Casing is a series of steel pipes that are run into a drilled oil well to stabilize the well, keep contaminants and water out of the oil stream, and prevent oil from leaching into the groundwater. Casing is installed in layers, in sections of decreasing diameter that are […]

January 9, 2018

How does the casing pipe work ? Choose your casing tubing !

Once a well has been drilled, if it is to become a production well, the well must undergo completion. While drilling a well cuts through the rock formations and allows drilling engineers to reach the reservoir below, the raw sides of the well cannot support themselves. Similar to the bones of […]

January 8, 2018

Bearing Pile, welded pipe Piles for construction

Bearing Piles 4 TYPES： 1. ELECTRIC RESISTANCE WELD PIPE (ERW PIPE PILES) Electric Resistance Weld pipe is normally produced in sizes from 2 3/8 inch OD thru 24 inch OD. Electric Resistance Weld pipe Piles ERW Wall Thickness (inches) Outside Diameter (inches) lbs / ft 0.188 0.219 0.250 0.312 0.375 […]

January 7, 2018

stainless steel wedge wire well screens research report

Introduction Well screens are a crucial component in water wells used to extract groundwater while preventing the passage of formation sediments into the wellbore. Over decades, stainless steel wedge wire screens have proven highly effective and durable for this purpose. In this report, I will provide a comprehensive overview of […]