September 7, 2015

L235 EN10224 ERW welded steel pipe

L235 EN10224 ERW welded steel pipe our company is specialized type of steel pipelines and steel coils, you can discover SSAW pipe, LSAW pipeline, ERW pipe, Galvanized pipe, Anti corrosion pipe, roofing sheet, Insisting on first-class quality, we purchased various scientific test devices.   l L235 EN10224 ERW welded steel pipe […]
September 26, 2015

ASTM A53 ERW steel pipes OD 210mm SCH40

ASTM A53 ERW steel pipes OD 210mm  ASTM A53 steel pipes is highly used to convey fluids at low / medium pressures such as oil, gas, steam, water, air and also for mechanical applications. Advantage of ERW pipe ERW pipe, among the largest advantages is that only television billet ends are heated […]
September 27, 2016

ASTM A53 Steel Pipe OD 219.1mm SCH 40 Grade A, Grade B

ASTM A335 spec covers small wall and minimum wall smooth terrific alloy-steel pipe (P22 Alloy Pipe) planned for high temperature level service. We are maker of ASTM A53 Gr B Pipe. We can produce ASTM A53 Grade B Pipe dimensions from 1 inch to 26 inch, ERW welded carbon steel pipe. ASTM […]
October 19, 2016

API 5L Grade B ERW steel pipes diameter 426mm wall thickness 9.53mm

Chemical Requirements for API 5L steel pipe API 5L Specifications covers seamless and welded pipe suitable for use in conveying gas, water, oil, and other melted media. The affixed requirements cover our offering of API 5L 45th Ed, PSL 1 Seamless and Welded; API 5L 45th Ed PSL 2 Seamless […]
October 28, 2016

ASTM A53 steel pipe OD 10 inch SCh40 60 80

ASTM A53 is a carbon steel alloy, utilized as structural steel or for low-pressure pipes. The alloy specifications are set by ASTM International, in spec ASTM A53/A53M. A53 pipe can be found in three types and two grades, A53 Type F, which is longitudinally furnace butt bonded or constant bonded […]
October 31, 2016

ASTM A106 Grade B OD 300mm SCH80 SSAW pipe

Spiral submerged arc welding( SSAW) pipe is made from hot rolled coiled steel by automatic immersed arc weld under typical climatic temperature level. All the pipelines are produced according to API Spec 5L, GB/T9711.1, GB/T9711.2, ASTM A252-89 requirement. Quality Standard of SSAW pipe ASTM A53 Standard Specification for Pipe, Steel, Black […]
November 14, 2016

ASTM A106, Gr.B seamless steel pipe,SCH40,OD 355.6mm, WT11.13mm

seamless steel pipe is used for the mechanical structure, hydraulic equipment ,which is have precision size ,good surface finish.It can greatly reduce mechanical processing hour and improve material utilization, and to improve the quality of products. High quality of cold draw seamless pipe line are mainly use the 10# 20#.In addition […]
November 24, 2016

api 5L X52,ISO 3183 L320 seamless steel pipe, for gas and oil lines

ISO 3183 L320 seamless steel pipe is our hot sale product, it has good chemical properties, it is used widely in life, we are ISO 3183 L320 seamless pipe suppliers in China, we only provide qualified ISO 3183 L320 seamless steel pipe products in the most good quality and reasonable […]
November 30, 2016

ASTM A53, ERW steel pipes, Grade B, SCH40.OD219.1mm

ASTM A53 is standard specification for Carbon Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless. and Abter Steel Pipe is specializing in A53B SCH40 ERW SRL Pipe production and exporting. We can monthly produce more than 10000 tons of ASTM A53 Grade B SCH 40 ERW pipes in SRL or DRL, according […]
December 12, 2016

ASTM A53 ERW Pipes, GR.B, OD 660mm STD oil line pipes

ASTM A53 is a carbon steel alloy, used as structural steel or for low-pressure pipes. The alloy specifications are established by ASTM International, in requirements ASTM A53/A53M. A53 pipeline is available in 3 kinds as well as 2 qualities, A53 Type F, which is longitudinally heating system butt welded or […]
December 14, 2016

API 5L carbon steel pipes, X60, SCH30,RDL line pipe

API 5L is a more comprehensive specification mainly developed for line pipes used in oil and gas industry; the range of strength grades is much wider. While the lower strength grades grades A & B are comparable to A106, the other grades have much higher strengths (e.g. X42, X56, X60,…etc). […]
December 23, 2016

API 5L line pipe , Seamless | SSAW | ERW | LSAW

The line pipe is used to transporter oil, gas and water for oil and gas industry It is low and middle pressure fluid transportation pipe lineout. Our company has rich technical force and advanced production equipment.   ERW LINE PIPE:   Seamless Type Outer Diameter Thickness Round pipe 12mm~273mm 1mm-12mm […]
January 9, 2017

ASTM A53 seamless steel pipes, Sch40, OD114.3mm,WT 6.02 line pipe

Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless ASTM A53 (ASME SA53) carbon steel pipe is a specification that covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8″ to NPS 26.  A 53 is intended for pressure and mechanical applications and is […]
January 27, 2017

ASTM A53 steel pipe, OD 219.1mm SCH 40,SRL,DRL tubing

ASTM A53 is a carbon steel alloy, used as structural steel or for low-pressure plumbing. The alloy specifications are set by ASTM International, in specification ASTM A53/A53M. A53 pipe comes in three types and two grades, A53 Type F, which is longitudinally furnace butt welded or continuous welded (Grade A […]
February 17, 2017

High precision ASTM A53 carbon seamless steel pipe for gas and oil

specifications of ASTM A53 carbon seamless steel pipe product Name ASTM A53 carbon seamless steel pipe Process Method Hot rolled/Cold drawn Size 1/2”-36”(outer diameter:6.0-720mm; Wall thickness:2.0-60mm) Wall thickness Sch10,Sch20,Sch30,STD,Sch40,Sch60,XS,Sch80,Sch100,Sch120 Length Fixed:3.0,5.8,5.85,5.9,6.0,11.8,12.0;Random Length:5-12m Standard API5L , ASTMA106/A53  DIN17175/1629  EN10204 ASME B36.10M-1996 JIS G3452 JIS G3454 JIS G3455 JIS G3456 JIS G3457 JIS G3461 […]
February 20, 2017

API 5L X52 PSL-2 seamless line pipe for gas and oil

The API SPEC 5L specification provides standards for pipe suitable for use in conveying gas, water, and oil in the natural gas and oil industries. The API SPEC 5L covers seamless and welded steel line pipe. It includes plain-end, threaded-end, and belled-end pipe, as well as through-the-flowline (TFL) pipe, and […]
February 24, 2017

ASTM A672 EFW Pipes & Tubes

ASTM A672 standard specification for electric fusion welded steel pipe for high pressure service at moderate temperatures. This specification covers electrical-fusion-welded steel pipe for high-pressure service at moderate temperatures. Heat treatment may or may not be required to attain the desired properties or to comply with applicable code requirements. An […]
February 27, 2017

ASTM A53-98 fluid pipe for conveying of petroleum and gas

Fluid pipe Standard: GB/T8163-1999, ASTM A53-98, JIS G3452-1998, JIS G3454-1998, ASTM A106, DIN 1629-1984 Tolerance on Dimensions Pipe types Pipe Szie(mm) Tolerances Hot rolled OD All ±1% (min ±0.50mm) WT All +15%, -12.5% Cold drawn OD 6~10 ±0.20mm 10~30 ±0.40mm 30~50 ±0.45mm >50 ±1% WT ≤1 ±0.15mm >1~3 +15% -10% […]
March 11, 2017

ASTM A53 ERW steel pipe Sch40, SRL ERW pipe

ASTM A53B ERW Pipe is meant for mechanical and pressure applications and is likewise appropriate for normal usages in steam, water, gas, and air lines. So, ASTM A53 spec pipe is a very common however extensively appropriate carbon steel pipe specification. And A53B ERW is more popular because ERW pipelines […]
March 28, 2017

ASTM/ASME A53/SA53 GR.B STD Seamless and Welded steel pipes

ASTM/ASME A53/SA53 seamless and welded steel pipe is a general, all-purpose pipe used in generator plants, refineries, compressor stations, natural gas transmission, and steam conduction. It is acceptable for welding, flanging, and bending. ASTM Specification A53 covers seamless and welded, black and hot-dipped galvanized nominal (average) wall pipe for coiling, […]
April 3, 2017

hot-rolled ASTM A53 Grade.B seamless steel pipe for oil and gas

ASTM A53 pipe (also referred to as ASME SA53 pipe) is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas and air lines. It is suitable for welding and for forming operations involving coiling, bending, and flanging, subject to certain qualifications. ASTM […]
April 12, 2017

Thin Wall EN 10217-1 Welded ERW Steel pipe for pressure purposes

ERW Steel Pipe: standard: API 5L, ASTM53, EN 10217-1, Use For conveying gas, water and oil either in the oil or natural gas industries. Thin Wall EN 10217-1 Welded ERW Steel pipe for pressure purposes Standard: EN10217-1, EN10210-1, EN10216-1/2 ASTM A106M,A53/A333ASTM A192,ASTM A209,ASTM A210 JIS G3454,JIS G3455 JIS G3456 API 5L,ASTM […]
April 17, 2017

API 5L Gr.B X42 LSAW steel pipe for water,oil and gas delivery

Abter LSAW pipe: Line Pipe can meet all requirements of high-pressure transmission pipeline for natural gas and petroleum and can be used in on-shore and off-shore oil and gas transmission.Used for oil and gas transportation, the general structure, mechanical structure. Standard: API5L, ASTMA252, ASTMA139, ASMEB36.10,AWWAC200, EN10217,EN10219,EN10224,EN10025; SY/T5037,SY/T5040,GB/T9711.1/9711.2,API 5L, GB/T3091 Anticorrosive coating:AWWAC205,AWWAC210,AWWAC222,AWWAC214 […]
April 28, 2017

API 5L Gr.B seamless line pipe with beveled ends

API 5L covers seamless and welded steel line pipe. It includes standard-weight and extra-strong threaded line pipe. It includes standard-weight and extra-strong threaded line pipe; and standard-weight plain-end, regular-weight plain-end, special plain-end, extra-strong plain-end, special plain-end, extra-strong plain-end pipe; as as well as bell and spigot and through-the-flow line(TFL) pipe. […]
May 24, 2017

ASTM A53 Grade B Carbon Steel seamless steel Pipes

ASTM A53 (ASME SA53) carbon steel pipe is a specification that covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8″ to NPS 26. A 53 is intended for pressure and mechanical applications and is also acceptable for ordinary uses in steam, water, gas, and air lines. […]
June 14, 2017

ASTM A53 Gr. B black carbon steel pipe for oil and gas pipelines

sizes:O.D : 21.3mm-712mm W.T : 0.5mm-25mm Less than 12 meters,5.8 m and 6m are common Length: 1. Single Random Length and double Random Length. 2. SRL:3M-5.8M DRL:10-11.8M or As clients requested length 3. fixed length(5.8m, 6m, 12m) Standard: API5L , ASTM A106 Gr.B, ASTM A53 Gr.B, ASTM A179/A192,ASTM A513-2007,ASTM A671-2006,ASTM […]
July 12, 2017

EN10217-1 ERW Transmission Steel Tubes For Pressure Purposes

1. Outside Diameter: Ф219-Φ660mm 2. Wall Thickness: 6-22mm 3. Length: 3-12m 4. Steel Grade: Q345B, API X42 – X80, L245, L555,J55, N80 5. Standard: SY/T5037-2000, GB/T9711.1-97, API Spec 5L 6.End:square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled, 7.Surface: Lightly oiled, Hot dip galvanized, Electro […]
July 31, 2017

API 5L PSL1 and PSL2 Carbon Seamless steel Pipeline Grade B/C

This Standard specifies requirements for the manufacture of two product specification levels (PSL1 and PSL2) of steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries. This Standard is not applicable to cast pipe.The API 5L specification is generally more clear about the limits on […]
August 3, 2017

ASTM A139 LSAW Structural pipes and pile pipes for low pressure liquid delivery

ASTM A139/A 139M covers five grades of electric-fusion(arc)-welded straight-seam or helical-seam steel pipe. LSAW steel pipe:Standard: ASTM A139, ASTM A252, JIS G3444 etc. Grades: Q215-345, Grade A-E, Grade 1-3 STK290-540 Standard: ASTM A139, ASTM A252, JIS G3444 etc. Grades: Q215-345, Grade A-E, Grade 1-3 STK290-540 Outside Diameter: Φ406mm-Φ1626mm (16″-64″) Wall […]
August 3, 2017

API 5L LSAW Transmission steel pipe for natural gas and petroleum

LSAW steel pipe refers to Longitudinal Submerged-Arc Welded Steel Pipe, which is made of hot-rolled steel plate or coils. LSAW steel pipe always goes to the big-sized welded pipe, which can’t be manufactured by electric resistance welding technique. API 5L LSAW steel pipes ( Double Submerged arc welded) are used […]
August 15, 2017

High Frequency Electric Weld (ERW) Line Pipe,ERW casing pipe

high frequency electric weld (ERW) line pipe and standard electric resistance weld pipe products are smoothly finished and thin-walled. They are produced by continuously forming coiled hot rolled strip into a tube and welding the longitudinal seam using high-frequency electric resistance welding. Size:(ERW, HFI, EFW) Outer Diameter: 6mm-610mm (1/16″-24″) Wall […]
September 28, 2017

EN 10208-2 Hot Rolled Seamless steel pipes

application: distribution of combustible media with determined pressure (previously DIN 17172) production method: – seamless: S – seamed: HFW high frequency welding SAW powder welding COW combined welding Fusion welds of strip joining for spiral pipes are acceptable after agreement grade: seamed and seamless: 1.0457 L 245 NB StE 240.7 […]
December 15, 2017

Line pipes for the oil and gas

Line pipe is a type of pipe that is manufactured from high strength carbon steel. It is typically made according to metallurgical specifications that were developed by the American Petroleum Institute (API). Line pipe can be used to build pipelines that transport a variety of resources including natural gas, oil, […]
January 26, 2018

ASTM A53 Black & Galvanized Pipe, 1/8″ – 26″

Product Name: ASTM Electrical Resistance Weld (ERW) Black and Hot-dip Galvanized Steel Pipe Standard: ASTM A53 Internatioanal Standard: ISO 9001 Size Range Seamless Pipe 1/8” ~24”, DN15~DN600 API Line pipe:1/8”-48” inch, DN6~DN1200 Welded pipe:1/2”-60“inch Wall Thickness  :sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140, sch160, xxs, Product […]
January 30, 2018

Why use Epoxy Coating Pipe? The definition of anticorrosive steel pipe.

The aging of steel tubes has prompted the birth of anticorrosive steel pipes: As carbon steel pipes age, they become subject to wear and tear. They develop weak spots, which can result in small leaks throughout the system. They can also gradually become unsafe, and eventually a failure may occur, […]
February 25, 2018

Austenitic Stainless Steel Seamless Pipe

Austenitic Stainless steel has stable austenitic structure in normal temperature, it possesses very high corrosion resistance, good cold workability and gcxxJ toughness plastic, weldability and non-magnetic. It has been widely used in chemical,oil refining, boiler, focxJ and other industries of the heat exchanger condenser, evaporator and fluid delivery, etc. Compared to […]
February 26, 2018

LIGHT GAUGE STAINLESS STEEL WATER PIPES _ Thin-walled stainless steel tube

Material (Grade): TP304 / 304L, TP316 / 316L Standard (Standard): CL / T 151-2001: “thin-walled stainless steel pipe.” GB / T 19228.2-2003: “Stainless steel thin-walled pipes – pressure pipe” JIS3448: light Gauge Stainless Steel Tubing For General Servive outer diameter (the OD): 16 ~ 219mm  thickness (the WT): 0.6 ~ 3mm (Welding method): TIG or TIG + plasma welding (TLG or TLG + Plasma) (Application): building water supply (Drinking […]
March 8, 2018

Size and Weight of Seamless Roll Steel Pipe Schedule,ASME B36.10M-1996

  Nominal Diameter Outside Diameter STD) (XS) (XXS) Sch.no Wall Thickness Nominal Weight NPS DN in. mm in. mm Ib/ft kg/m 1/8 0.405 10.3 STD 40 0.068 1.73 0.24 0.37 1/8 0.405 10.3 XS 80 0.095 2.41 0.31 0.47 1/4 0.540 13.7 STD 40 0.088 2.24 0.42 0.63 1/4 0.540 […]
April 1, 2018

Petroleum Cracking Pipe ASTM A335 Gr P5,LENGTH 5-5.8 Mtr -Russian customers

Hello Dear Sir! Please let me know the possibility of manufacturing of pipes of steel grade 1Cr5Mo ASTM A335 P5. Best regards, Director of “UMTS”, LLC. Vedernikov Ruslan       We ask to inform terms of manufacturing and the price for following positions:  Petroleum Cracking Pipe  ASTM A335 Gr P5   LENGTH […]
May 10, 2018

API 5L Line pipe PSL1 / PSL2

Line pipe specification: 10.3-2032×1.7-39.7mm   Executive Standard: GB/T9711.1/API SPEC 5L Uses: Used for gas, water and oil transportation in oil and natural gas industry API SPEC 5L-2011 (Line Pipeline Specification), prepared and published by the American Petroleum Institute, is common across the world. Line pipe: It transports oil, gas or water […]
May 23, 2018

Steel Pipe With Heat Insulation | polyurethane thermal insulation steel pipe

Insulation steel pipes are widely used in liquid and gas transmission pipe networks, chemical pipe insulation projects in petroleum, chemical, central heating and heating networks, central air-conditioning ventilation pipes, and municipal engineering. High-temperature prefabricated direct-buried thermal Insulation steel pipe is a direct-buried prefabricated thermal Insulation steel pipe with good thermal […]
November 5, 2018

Flange anticorrosive steel pipe

Flanges are disc-shaped parts that are most common in plumbing and flanges are used in pairs. In plumbing, flanges are mainly used for the connection of steel pipes. In the pipelines that need to be connected, a variety of flanges are installed, and the low-pressure pipelines can use wire-bonded flanges, and the […]
November 5, 2018

Polyurethane insulation steel pipe

Polyurethane foam insulation seamless steel pipe   The polyurethane direct buried heat preservation pipe is a direct buried preheating heat preservation pipe with good heat preservation performance, safety and reliability, and low engineering cost. The buried thermal insulation pipe not only has the advanced technology and practical performance that is difficult to […]
November 7, 2018

ASTM A53 seamless and welded black and hot-dipped galvanized steel pipe

ASTM A53 covers seamless and welded black and hot-dipped galvanized steel pipe. The pipes are frequently ordered as follows: Type Black, HDG Manufacturing SMLS, ERW Grade A B Chemical compositions C Mn P S ≤0.25% ≤0.95% ≤0.05% ≤0.045% Cu Ni Cr Mo ≤0.4% ≤0.4% ≤0.4% ≤0.15% V       […]
November 28, 2018

API 5L / ASTM A106 / A53 Gr. B Seamless Carbon Steel Tube / Pipe

API 5L, ASTM A53, ASTM A106 Gr. B seamless carbon steel tube / pipe is often used worldwide for general delivery purpose and supplied based on sizes in ASME B36.10M. The pipes are frequently ordered as follows:   Chemical compositions C Si Mn P S 0.17%-0.23% 0.17%-0.37% 0.35%-0.65% ≤0.03% ≤0.03% […]
December 29, 2018

API 5L Grade-B ERW Line Pipe Technical Specifications , 20″DN (508.0 mm)×WT 7.9 mm

Schedule of Requirements IFT NO. PD.2312/397-MECD/MEZ/PIPE.Materials: Line Pipe. Item No. Description of Goods Qnty Unit A. Line Pipe. As per detailed technical specifications at Section 7. Size and quantity are as follows:     A.1 DN 20″ x WT 7.9 mm API 5L Grade B, ERW 450 Meter. A.2 DN […]
January 7, 2019

Corrosion Resistance of API 5L Pipeline Steel with Coating Protection

ABSTRACT The corrosion resistances of enamel-coated steel pipe in  3.5 wt% NaCl solution was evaluated and compared with those of epoxy-coated pipe using open-circuit potential, linear po- larization resistance, and electrochemical impedance spectros- copy tests. T-001c enamel slurry and GP2118 enamel powder were sprayed to steel pipe in wet and […]
January 12, 2019

STEEL PLATE AND STEEL PIPE FOR LINE PIPES

This is a §371 of International Application No. PCT/ JP2008/070726, with an international filing date of Nov. 7, 2008 (WO 2009/061006 Al, published May 14,2009), which is based on Japanese Patent Application No. 2007-290220, filed Nov. 7,2007, the subject matter of which is incorporated by reference. TECHNICAL FIELD This disclosure […]
February 17, 2023

Wire Wound Screen (Filter Pipe)

The all-welded wire wound sieve pipe is widely used in the oil, gas and water well sand control industries all over the world. Its position in the well industry is particularly prominent. It is the most widely used filter screen of various water resources. abterstee screen using the world’s most […]